Pollmeier LVL- 2.0E

Pollmeier™ LVL – 2.0E

The strength is in the engineering

Pollmeier™ LVL is made in Germany, in Europe’s
most modern laminated veneer lumber factory. Raw
material procurement targets slow grown, selected
logs from surrounding, sustainably managed forests.
The logs are peeled to veneers which are ultrasonically and visually graded.
The veneers are arranged in a specific pattern
using scarf joints to maximize the strength,
stability and stiffness and to disperse the
naturally occurring characteristics of wood, such
as knots, that can weaken a sawn lumber beam. The
veneers are then bonded with waterproof adhesives
under pressure and heat. The entire production
process, from the log to the finished product, runs
under one roof with highest quality control standards.
Pollmeier™ LVL beams are exceptionally strong, solid
and straight, making them excellent for most primary
loadcarrying beam applications.

Lifetime Limited Warranty

Pollmeier™ LVL is backed by a lifetime limited warranty.

Sustainable

Pollmeier™ LVL is a building material
with built inenvironmental benefits.
It is made of wood veneer,
a renewable resource.
Pollmeier uses PEFC certified
forest management and procurement systems, which help ensure
wood comes from well managed forests.

In Pollmeier’s manufacturing process,
no part of the log goes to waste.

PEFC

Pollmeier™ LVL – 2.0E Product Specifications & Design Values

Allowable Stress Design Values (PSI) – Draft

Grade	Bending Stress F_b	Mod. of Elasticity E (x10⁶)	Shear Stress F_v	Compression Stress Parallel to Grain F_c	Perp. to Grain F_c⊥
3080F_b-2.0E	3080	2.0	320	3075	600

Pollmeier™ LVL – 2.0E Product Specifications & Design Values

Thickness

1 - 1/2”

1 - 3/4”

3 - 1/2”

5 - 1/4”

7”

Depth

3 - 1/2”

5 - 1/2”

7 - 1/4”

9 - 1/4”

9 - 1/2”

11 - 1/4”

11 - 7/8”

3 - 1/2”

5 - 1/2”

7 - 1/4”

9 - 1/4”

9 - 1/2”

11 - 1/4”

11 - 7/8”

14”

16”

18”

3 - 1/2”

5 - 1/2”

7 - 1/4”

9 - 1/4”

9 - 1/2”

11 - 1/4”

11 - 7/8”

3 - 1/2”

5 - 1/2”

7 - 1/4”

9 - 1/4”

9 - 1/2”

11 - 1/4”

11 - 7/8”

3 - 1/2”

5 - 1/2”

7 - 1/4”

9 - 1/4”

9 - 1/2”

11 - 1/4”

11 - 7/8”

Lengths from 8' to 39' in 1ft increments.

Connectors and Fastening Systems

We recommend the use of Simpson Strong-Tie® connectors and fastening systems with Pollmeier™ LVL.
Please refer to: Strongtie.com

Warning: Failure to follow proper procedures for handling, storage and installation could result in unsatisfactory performance, unsafe structures and possible collapse.

Keep Pollmeier™ LVL dry. These products are intended to resist the effects of moisture on structural performance from normal construction delays but are not intended for permanent exposure to the weather.
Unload products carefully, by lifting. Support the bundles to reduce excessive bowing. Individual products should be handled in a manner which prevents physical damage during measuring, cutting, erection, etc.
Keep products stored in wrapped and strapped bundles, stacked no more than 10' high. Support and separate bundles with 2 x 4 (or larger) stickers spaced no more than 10' apart. Keep stickers in line vertically.

Product must not be stored in contact with the ground, or have prolonged exposure to the weather.
Use forklifts and cranes carefully to avoid damaging product.
Do not use a visually damaged product. Call your local Pollmeier™ LVL products distributor for assistance when damaged products are encountered.
For satisfactory performance, Pollmeier™ LVL must be used under dry, covered and well-ventilated interior conditions in which the equivalent moisture content in lumber will not exceed 16 %.
For built-up members, Pollmeier™ LVL shall be dry before nailing or bolting to avoid trapping moisture.
Pollmeier™ LVL shall not be used for unintended purposes such as ramps and planks.

Handling

About Pollmeier™ LVL – 2.0E

The Pollmeier Difference