Beech – Solid wood panels: Redheart beech, lightly steamed.

The solid wood panels made of redheart beech have no visible surface defects on the face (side A), and they comprise laminations with and without brownheart or redheart, sorted for homogeneous colour. The back (side B) is also free of visible defects, and comprises laminations with and without brownheart and redheart, but is not sorted according to colour.

Reasons for choosing Pollmeier

  • Sustainable products
  • Warm and natural look
  • Consistent quality all year round
  • Pollmeier as a strong partner
  • PEFC certified (PEFC/04-31-1212)
  • 100% Made in Germany

Pollmeier Rietberg PEFC Zertifikat

  • Leimholzplatten von Pollmeier aus Kernbuche, Vorderseite
  • Leimholzplatten von Pollmeier aus Kernbuche, Rückseite
Leimholzplatten von Pollmeier aus Kernbuche, Vorderseite
Leimholzplatten von Pollmeier aus Kernbuche, Rückseite
  • Side A

    (Face without visible surface defects, lamellas with or without brown
    and redheart and sorted for homogeneous colour.)

    Permitted features:

    • solid wood sound knots
    • isolated closed small knots up to Ø 3 mm
    • sporadic discolorations or mineral spots, becoming visible after sanding
      (50 mm long and 3 mm wide)
    • sporadic lamellas with diminishing redheart
    • sporadic lamellas without redheart

    The grading of the back side in non-visible areas will be discussed individually with the customer.

  • Side B

    (Back side without visible surface defects, lamellas with or without
    brown and redheart)

    Additionally permitted features:

    • small knots up to a Ø 5 mm
    • isolated discolorations and mineral spots appearing after sanding
    • no colour requirements
    • sporadic blue stains caused by water

    The grading of the back side in non-visible areas will be discussed individually
    with the customer.

  • General quality characteristics

    • Wood species: German beechwood / redheart beech – lightly steamed
    • Moisture content: 7 - 9 %
    • Version: with end-to-end lamellas
    • Glueing: Stress group D 3  (Interiour use with frequent short-term exposure to running water or condensation water and/or long-term exposure to high atmospheric humidity. Exteriour use if protected from weather), technically flawless glueing, butt joined and glued with white glue PVAC, free from formaldehyde
    • Finish: grit 80
    • Tolerances: +/- 5 mm length or width, +/- 0,3 mm thickness
    • Diagonal stability: max. 2,5 mm warpage per meter
    • Quantities delivered: Over- / underdelivery max. 10% per item
    • Minimum order quantity: approx. 30 pcs per dimension
    • Packaging: panels,, on euro-pallet (on loan), foil-wrapped, secured by straps
  • Downloads