Blitz Club in Munich: perfect beech lumber interior for revellers



Museumsinsel 1, 80538 Munich

Interior design

Simon Vorhammer and Andreas Müller (Studio Knack)


Gruber Schreinerei GmbH & Co.KG

"As we needed to mill relatively deep recesses, we went in search of a timber material with a depth of at least 100 mm. BauBuche beams met our requirements to the tee. "
Andreas Müller
"Our partitions do not only look great, they also enhance the sound experience.""
Simon Vorhammer

Until the complete refurbishment of Deutsches Museum in 2023, the former „Forum der Technik” complex near Ludwigsbrücke is temporarily used as a concert and events venue. It includes the Blitz Restaurant offering contemporary Latin American cuisine and the Blitz Club for music lovers, both managed by the same operator.


The club features two dancefloors. The long „Blitz” room measuring 35 x 8 metres forms the heart of the club. Its shape is based on the layout of the historic building and partitions in BauBuche. The dark ceilings, walls and pillars are set off against light-coloured laminated veneer lumber elements for maximum effect.


For the interior design of the club, optimising the room acoustics was a key issue. That is why the sound system has been custom-engineered to suit the room, similar to a concert hall. The interior elements are part of the acoustic design. „Our partitions do not only look great, they also enhance the sound experience,” explains Simon Vorhammer. A number of measures were taken to avoid unpleasant echo effects: diagonal surfaces deflect the sound waves while perforated elements absorb high-pitched frequencies. The pillars are clad in thin sheet metal elements that serve as resonators: „The metal absorbs low-frequency sound waves, thus reducing the reverberation time.”


Together with an acoustic consultant, Simon Vorhammer und Andreas Müller designed a number of modular BauBuche dance booths. The inclined side and rear walls deflect the sound in all directions rather than reflecting it straight back. The milled surface pattern of the inclined rear walls was developed with the help of a parameterised 3D model: „At the front edges, we have straight-lined triangular structures. Towards the back, there are concave recesses with varying cross-sections and undercuts, deflecting the sound waves in all directions.” When looking for a material to implement their design, the architects came across BauBuche beams. „As we needed to mill relatively deep recesses, we were looking for a timber material with a thickness of at least 100 mm,” says Andreas Müller. „BauBuche beams met our requirements to the tee.”


Even the two bar counters of the Blitz Club are made in BauBuche. „We like the material, and using it everywhere gives our club that special streamlined look,” explains Andreas Müller. Both the bar area next to the large dancefloor as well as the long bar counter in the adjacent room are made of trapezoid BauBuche panels arranged on a rectangular floor layout. The panels are installed diagonally, extending right to the edge of the bar counter.


The second, much smaller dancefloor features darker colours. Its walls are decorated with a CNC-milled relief that looks organic but was actually created by an algorithm. The panels are made from MDF and coated in black.


The architects and engineers had only four months to design and build the Blitz Club. To complete the project on time, Andreas Müller and Simon Vorhammer first developed a digital 3D model. In the course of the planning stage, this model was then refined and fine-tuned to a point where all documents required for the actual construction, as well as the CNC data could be generated directly on the basis of the model.

Share reference

Advice for architects, engineers, commercial builders and timber construction:

+49 (0)36926 945-560

Advice on timber, BauBuche and for Pollmeier LVL:

+49 (0)36926 945-163